This article presents a selection of original ideas for decorating your car with LED lighting, which can significantly change the appearance of your vehicle.
Interior lighting with a remote control
This type of lighting can give your car interior a unique design. This type of tuning has various modes and shades of light. Compared to similar products, this lighting has a significantly better density of LED placement. It has a pleasant and soft light and consumes relatively little energy. The color can be controlled remotely using the remote control. You can install this type of lighting yourself without any special knowledge or installation skills.
Car headlight lighting
This type of tuning offers flexible LED strips for car headlights. These strips are designed to function as daytime running lights or dynamic turn signals. Available colors: white, white to yellow, blue to yellow, blue to yellow, and red to yellow. You can install it yourself. At night, the LED strip looks very beautiful.
Underbody lighting
This type of tuning is designed for nighttime use, which is appreciated not only by drivers of other cars, but also by pedestrians. In terms of manufacturing technology, this lighting is made from high-quality, wear-resistant materials. The lighting can be set to flash in time with the music playing in the car, and it can be installed at any point in the wiring. It can be controlled remotely via a smartphone. This lighting can also be installed by hand, which does not take much time.
Car door lighting
This type of tuning, such as lighting for car doors, is made from LED strips with two LED colors: flickering red and white. When the car door is opened, they light up automatically. Thanks to this lighting, the car can both illuminate the road surface when passengers are getting in or out, and increase visibility at night.
Car trunk lighting
A type of tuning in which the vehicle’s signal lights can be duplicated. It is made of a transparent sealed casing. It is resistant to dirt and water. The length of such lighting is 120 centimeters, and it is installed in the gap between the trunk lid or rear bumper using adhesive tape. This LED light has a number of operating modes: turn signals (right, left), parking lights, hazard lights, driving mode, brake lights, and reverse. It can be installed in most cars.
Equalizer (LED) for the rear window of the car
This type of tuning will allow you to distinguish your vehicle from other cars moving in the opposite lane. This equalizer can be installed on the rear window of the vehicle by connecting it to the on-board network with a cable. The equalizer’s backlight not only illuminates the rear window of the car, but also creates a rhythm of music in the passenger compartment.
LED turn signals for cars
In terms of manufacturing technology, this type of tuning is made from a mounting board. Its principle is to indicate a turn, which is automatically activated when the side turn signals are turned on. The board has LEDs 15 cm (28 pcs), 18 cm (32 pcs), and 28 cm (44 pcs) long. Installation is carried out on the surface of the rear-view mirrors. They provide good visibility both during the day and at night and work perfectly at both high and low temperatures. The operating voltage is 12 V.
LED lighting for car seats
This type of tuning can be installed on both the rear and front seats of the car using adhesive tape. Their design is quite simple, and the installation itself does not take much time. The operating voltage is 12 V. A remote control is available to adjust the brightness and color of the backlight, which will serve as additional lighting.
Trunk lighting
This type of tuning will allow you to find something in the trunk of your car, which is a fairly important component for a car. You can install it yourself by attaching the lighting to the adhesive base on the tape. In terms of service life, this type of lighting has a long life cycle.
LED ceiling lighting for cars
This type of tuning will ensure sufficient lighting in the car interior. Manufacturers guarantee good build quality. There are several backlight modes: yellow, blue, and white. It has low energy consumption and a long life cycle. Installation is carried out on the car ceiling, which is suitable for any vehicle model.