What is the Best Tacoma TRD Pro Grill for Trucks? | Autance

Most people dream of getting away on the weekend as they drive over the dunes and rocky terrains. Toyota Tacoma TRD Pro is the best local off-road truck that does not require an aftermarket lift kit. You can use it to attend to simple errands such as moving furniture from one place to another. When…

  • 823
What is the Best Tacoma TRD Pro Grill for Trucks? | Autance © What is the Best Tacoma TRD Pro Grill for Trucks? | Autance

Most people dream of getting away on the weekend as they drive over the dunes and rocky terrains. Toyota Tacoma TRD Pro is the best local off-road truck that does not require an aftermarket lift kit. You can use it to attend to simple errands such as moving furniture from one place to another.

Tacoma TRD Pro Grill

When you drive this truck, someone might conclude that you are a severe truck enthusiast. It has additional performance features that are exceptionally functional. Therefore, a purpose-built truck like this upgrades your image. It comes with useful features such as the Tacoma TRD Pro grill.

If you have limited time, please check the comparison table to go to our top recommendations:



Further information

Seven Sparta Led Toyota Tacoma TRD Pro Grille

- Brand: Seven Sparta
- Package Dimensions: 11 x 1.75 x 4 inches
- Item Weight: 8 ounces
- 4 PCS LED lights for the rainy days or foggy days, snow trails or at night
- Upgrade ABS plastic shell with fuse adapter and harness wire
- Perfectly design replacement for 2016-2019 Tacoma TRD Pro
- No drilling required
- Takes 15 minutes to finish installation

Garnish Radar Sensor Cover Front Grille

- Brand: Seven Sparta
- Package Dimensions: 8.66 x 4.61 x 2.13 inches
- Item Weight: 5.9 ounces
- Cover compatible with front grill of Tacoma TRD PRO 2018 & 2019
- Prevent water & keep radar sensor work normally
- The surface layer is made of Acrylic, and the internal layer is made of ABS plastic
- After you replace the garnish sensor, the sensor may take 3-5 days to recalibrate itself

Zgauto LED Light Grille

- Brand: OMU
- Package Dimensions: 10.5 x 4.5 x 1.7 inches
- Item Weight: 7.2 ounces
- Only fit for TACOMA TRD GRILLE 2016-2018
- Protect your car while driving in rainy or foggy days
- Direct installation, easy to install on the grille
- Packge: 4 x LED Amber lights, 1 x wire and Fuse Adapter
- Warranty: 1 year

TOYOTA PT228-35170 TRD Grille

- Brand: TOYOTA
- Product Dimensions: 45 x 7 x 15 inches
- Item Weight: 4.5 pounds
- Fit Type: Universal Fit
- Finish: matte black finish
- Material: abs
- Trd: trd pro

Haotongda Front Tacoma TRD Pro Grille

- Package Dimensions: 8 x 4 x 1.5 inches
- Item Weight: 5.6 ounces
- Cover fit front grill of Tacoma TRD PRO 2018 & 2019
- Prevent water & keep radar sensor work normally
- The surface layer is made of Acrylic, and the internal layer is made of ABS plastic
- After you replace the garnish sensor, the sensor may take 3-5 days to recalibrate itself

What is a Grille?

It is a front bumper of a vehicle that covers the truck’s opening and allows penetration of air. It protects both the engine and the radiator of your Toyota Tacoma. The style and design of the grille depending on the model of the manufacturer. 

It is a screen-like protective barrier that protects the engine bay and allows the air to enter and cool things down. Some Tacoma TRD might have more than one grille, and it can be located beneath the main grill for cooling the brakes.

Therefore, the grill is essential, apart from its sleek ornamental design. It is also imperative to keep it unbarred and clear. In case of any malfunction, contact your Toyota Tacoma TRD Pro grill manufacturer for checking and possible replacement.

Things you Should Know About Toyota Tacoma

Toyota Motor Corporation brought the upgraded version of the Tacoma pickup truck into the U.S markets. It features several minor enhancements that make it more comfortable when using it daily. Toyota has dominated the market for a long time, so the new improvements make it stay relevant. Here are the things you should know about the Tacoma Pro truck:

Tacoma TRD Pro Grill
Tacoma TRD Pro Grill For Trucks
  • New front Tacoma Pro Grill: Toyota Motors designed a great front grill to make Tacoma truck unique. The transformation of the TRD grille design makes it a great pickup. You can spot any Tacoma truck based on the grille it has.
  • LED lighting: The recent update includes incredible LED lighting such as bed lamps, headlamps, and running lights that function during the day. These lights are positioned at an inclined angle, and there are additional sequential lights.
  • Large touch screen: The new truck comes with an 8-inch touchscreen comprising the new multimedia system. It has a large screen with additional buttons, unlike the previous trucks.
  • Adjustable 10-way power seat: Most of the Tacoma owners have complained about the awkward position of the driver’s seat. Although the seat is still mounted to the floor, you can adjust it to a 10-way power seat allowing the drivers to be comfortable.

Installation Process of Tacoma TRD Pro Grill

The most popular modification to begin with on your Toyota Tacoma is to upgrade the grill. Tacoma with the TRD model often comes with a retro style and an aggressive Toyota logo design. Some TRD Pro grill models are relatively expensive, and they give your truck an upgraded look.

To begin the installation process, ensure you have the right tools. The equipment required includes a 10mm socket, cutting pliers for installing the TSS sensor, and a screwdriver. Then follow the process below to install the TRD Pro grille:

Assemble the parts of Pro Grille

You should assemble the lettering plaque if your Toyota truck doesn’t come with an already installed grill. You can find the letter in the designated slot, and it is held into place on the grill insert with four small silver screws. Place the letter plate in a proper orientation and then screw it.

Don’t over tighten the screws because they are tapped into the plastic threads. If you have Toyota Safety Sensor (TSS), you should remove the filler piece, held by two metal fittings and two tabs. The fittings are difficult to remove, so you should use the cutting pliers.

Replace it with a TSS garnish with an OEM style. The garnish has two metal fittings to hold it in place. There are two U-shaped channels between the metal fittings and the tabs that receive the circular nuts from the original grille.

To prevent unnecessary scratches, maintain the position of protective plastics till the grille is installed. So, the Tacoma Pro grill is ready for installation.

Remove Original Equipment Manufacturer (OEM) Clips and Bolts

The grille in Toyota Tacoma is held in place by two clips and two bolts located on top of the grill. Undo all the plastic connectors that bind the TSS sensor before you go ahead and remove the grille. Disconnect the actual sensor after popping it off.

Pry out the whole grille after you remove the TSS connectors. Grab one corner and remove it from the other corner at a time. You should be careful if you have the TSS; therefore, you should unhook the sensor before pulling the grill.

Remove the TSS Sensor

Lay the grille on a soft surface such as a blanket or grass to prevent any damage. Using your screwdriver, unscrew the outer screws, then remove the sensor. Remove the wiring harness from the remainder of the grille at this stage. Unplug the circular nuts using the screwdriver. You will use both the nuts and screws in the step that follows.

Transfer the TSS Sensor into the Tacoma Pro Grill

Mount the circular nuts you unscrewed in the last step. Put the TSS in orientation and tighten the two bolts attached to the grill.

Remove the OEM Grill Insert

The innermost screws and tabs hold the grille insert firmly. Do not try to remove the grille before unscrewing the screws. After removing the screws, you can then remove the tabs. Dispose the screws because you don’t need to use them with the TRD Pro grill mounted with pressure tabs.

Pop the locking tab inwards and deter it from exploding back outward using light pressure. Then you can remove the insert after a few pressure tabs. Insert the new Pro grille in the grille surround.

Install the Duplicate Pro Grill Insert

The tabs on the backside hold the grill in place. Although this is a weakness in design, there is no issue with that, and it cannot fall out. Push it in until you hear a clicking sound; this confirms that the tabs are in place. 

To ensure that the tabs are tight enough, give it a light push at the backside. You can notice the harness at the bottom of the TSS sensor. After that, you can now reinstall the grille again by repeating the removal stages in a reverse way. If you apply a small amount of pressure, fix the seats firmly at the bottom of the Tacoma TRD Pro grill.

Which is the Best Grill for your Toyota Tacoma Truck?

If you own any of the Toyota Tacoma models from 2016 +, you may wish to upgrade your grille to give your truck a fresh and sleek look. Different companies have different models of grill that can suit your vehicle. So take a look at some of the highlighted models:

1. Seven Sparta Led Toyota Tacoma TRD Pro Grille

Seven Sparta Led Toyota Tacoma TRD Pro Grille is made and designed to replace the 2016 to 2019 Toyota Tacoma TRD Pro grill. It is constructed with ABS plastic material. This material prevents corrosion and scratch; therefore, it cannot fade even if exposed for a long duration.

Each set of Seven Sparta Led Toyota Tacoma TRD Pro Grille comes with harness wire and an effective fuse adaptor for quick installation. The LED lights provide you with safe driving because of proper visibility even during foggy or rainy days. Their lights are the best for snow trails or for driving at night.

The installation process is relatively easy because no drilling is required. The mounting takes only 15 minutes to complete. You can read the installation process in this article to help you install it faster and efficiently.

Made of robust ABS plastic material
Offers safety driving
Easy to install
The best design replacement
A fuse does fit micro fuses

2. Garnish Radar Sensor Cover Front Grille

The front grill Garnish sensor cover is compatible with Toyota Tacoma TRD Pro 2018 and 2019 models. The radar sensor might not work if you replace your existing grill with a TRD Pro grill. But with the Garnish cover, the radar sensor continues to work perfectly. 

The front grill is made of high-quality materials; the internal layer is constructed using sturdy ABS plastic, while the surface layer is made of robust Acrylic. It takes about five days to recalibrate itself; hence warning might pop up during this period.

It has a garnish sensor that is compatible with Tacoma 2018 and 2019 TRD Pro.
It is made of high-quality materials such as ABS plastic and Acrylic
Prevents water during rain or snow
It recalibrates itself after five days
No sensor off light

3. Zgauto LED Light Grille

Zgauto LED Light Grille is only fit for the Toyota Tacoma model of 2016 to 2018. It gives your Tacoma truck a head-turning style at the front. You demand total visibility during your road adventures.

But if you have Zgauto LED Light Grille, you don’t have to sacrifice your truck design look to get it. It offers you a great design of aftermarket grill along with front-end LED lights functionality. This grill also provides you with both spot and flood beams during road adventures.

It’s easy to mount because it comes with hardware installation components. You can’t beat this grill when it’s time to put together your perfect and robust truck. It comes with a one-year warranty.

Easy to install
It makes your truck look attractive
It has a high intensity LED lights
It has flood and combo spotlight patterns for ideal visibility.
It has a one-year warranty.
Quite expensive

4. Toyota TRD Grille

The Toyota TRD grille is a classy product for truck owners who want to enhance their Tacoma truck’s design. It is made of high-quality chrome material used along with the truck housing; hence it has a robust layout. The Toyota logo is tactically placed on the housing because it has measurements for Tacoma trucks’ 2016 and 2017 models. 

It has original OEM
It is the top quality product
It gives your truck high performance
It is a universal fit
Relatively expensive

5. Haotongda Front Tacoma TRD Pro Grille

The Haotongda garnish sensor is ideal for the Tacoma TRD Pro front grill of 2018 and 2019 models. It prevents water from getting into the radiator and engine and keeps the radar sensor working usually. 

The radar sensor may not function accordingly due to harsh weather such as snow and rain. But if you install a garnish sensor, then it usually works. This grille is made of ABS plastic material, hence making it durable.

It recalibrates itself after five days
It is made of strong ABS plastic material
Fit for 2018 and 2019 Toyota Tacoma models
You are guaranteed 30-days’ money-back.

Frequently Asked Questions (FAQs)

Which grill works best with a third-generation TRD with the front camera installed behind the Toyota logo?

Most of the models, such Tacoma Pro grill with garnish sensor, fits in your truck except those with front cameras.

Can Tacoma TRD grill upgrade my image?

Driving Toyota Tacoma is like someone who is driving a Ferrari. If someone sees you with this model might think you are a great motor enthusiast. Therefore, a purpose-built truck such as this model can upgrade your image.

What is the primary purpose of the TRD Pro front grille in the Toyota Tacoma truck?

The front grille was designed to allow adequate airflow below the hood for cooling the radiator and the engine. Trucks have components that can run the machines, and heat is generated through friction, so it is essential to have several ways to cool off hence the main reason for installing the front grill.


This article gives you a comprehensive option you can consider when looking to replace the Tacoma TRD Pro grill. Some of these models are easy to install if you follow the process systematically. Several options can suit your Toyota pickup truck. Look for the model that works for you best and within your budget.

Commnets 0
Leave A Comment